ASHLY MX-406 มิกเซอร์ 6-Channel Mic/Line w/EQ, 2RU The MX-406 is a rack-mountable six-input, stereo microphone/line mixer designed to be used in fixed or portable installations. Each input will accept either microphone or line-level signals. If microphones are used, a -20dB pad switch is available. The microphone input has an ultra low-noise studio-grade mic preamp with up to 60dB of mic preamp gain. A three-position switch allowing you to set input gain for -20, -40 and -60dB is located on the front panel. Each input has bass and treble shelving filters with individual control of each filter and a level and pan control. A separate Aux input control adjusts line level sources, such as an external processor, CD player or tape deck. Additional front panel controls include: Stereo Aux Input, Aux Master Output, Left and Right Stereo Output and an On/Off Power switch. A Mono/Phones output control allows you to adjust the mono output and stereo headphone output. The Stereo headphone output jack is located on the front panel. Front panel LED indicators include channel clip, Phantom power, AC power and an 11-step LED output level meter. Connections on the rear panel include a combination 1/4” - XLR jack for each input and an XLR transformer balanced mono output. The balanced stereo output jacks are 1/4” TRS. Channel inserts are 1/4” TRS. Left and right Aux In (return) and Record Out are RCA type jacks. A switch turns the 48V Phantom Power for use with condenser mics on and off. Designed and built in the USA, the MX-406 has an all-steel chassis, contains only quality components and has a five-year warranty. General Specifications DISTORTION THD at +4 dBu, 20Hz-20KHz <0.05% THD at +12dBu, 30Hz-10KHz <0.05% IMD (SMPTE) at +12dBu <0.05% HUM & NOISE (20Hz-20KHz at max preamp gain) Equivalent input hum and noise <-127dBu Residual output noise, TRS outputs, all levels at minimum <-100dBu Aux Out, Aux Master and all Ch. Aux at nom. <-80dBu MAXIMUM VOLTAGE GAIN (±2dB) MASTER Mic/Line Input to Master Output +84dB Mic/Line Input to Mono Output, 600 ohm load +84dB AUX SENDS Mic Input to Aux Master Output, pre ch. level 84dB Mic Input to Aux Master Output, post ch. level 99dB Stereo Line in to Aux Master Output 32dB FREQUENCY RESPONSE 20Hz-20KHz +0.5/-1.0dB EQUALIZATION Bass ±12dB at 70Hz, shelving Treble ±12dB at 8KHz, shelving CROSSTALK Adjacent inputs, 20Hz-20KHz <-65dB VU METERS (Stereo Outputs) 0VU = +4dBu -21 to +6 VU INDICATORS PEAK INDICATORS Peak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping PHANTOM POWER +48 VDC applied to all Mic Inputs, switchable on front panel. Maximum total current draw = 80mA. Maximum single channel current draw = 14mA. Gradual power-up and down to eliminate "pops". SHIPPING WEIGHT 15 lbs. POWER REQUIREMENTS 100-240 Volts, 50-60 Hz – 30 watts DIMENSIONS: 19" wide x 3.50" high x 8.0" deep. | 
