CHEVIN S600 POWER AMP เพาเวอร์แอมป์ เครื่องขยายเสียง 600+600 W. @ 4 ohms,1200@  8 ohm/Bridge

The Chevin S600 is designed to meet every standard for professional amplification.

 Its powder coated steel face plates and heavy-duty steel chassis reflect the

 manufacturing quality within.

 Technical specification

 Output Power

 Both channels driven, 4 Ohm, 1 kHz, 1 % THD 600 W per channel

 Single channel driven, 4 Ohm, 1 kHz, 1 % THD 640 W / channel

 Both channels driven, 8 Ohm, 1 kHz, 1 % THD 340 W per channel

 Single channel driven, 8 Ohm, 1 kHz, 1 % THD 360 W / channel

 Bridge, 8 Ohm, 1 kHz, 1 % THD 1200 W

 Distortion, 1 kHz, THD % < 0.02 %

 Frequency response

 - by 10 dB below nominal power

 20 Hz – 20 kHz +0 /-1 dB

 20 Hz – 50 kHz +0 /-1 dB

 Damping Factor, 8 Ohm, 1kHz > 200

 S/n Ratio

 S/n Ratio “A“ weighted - 103 dB

 - 112 dB

 Input Sensitivity – by nominal power / 8 Ω 1.0 V

 Input Impedance balanced 20 kΩ

 Slew Rate / 8 Ω 20 V / μS

 Subsonic filter On / Off and 40 Hz / 80 Hz

 Limiter On / Off

 Controls Front: mains switch

 volume control (both channels)

 Rear: DIP switch – mode selection

 BRIDGE switch

 Indicators Bridge: yellow LED

 Protect, Clip: red LED

 Signal: green LED

 Power: blue LED

 Cooling step switched fan

 Protection short-circuit, temperature

 Dimensions 483 x 88 x 370 mm

Weight 9.0 kg  Power Requirements AC ~ 230 V / 120V 50 / 60Hz