QSC DCM 300 Digital Crossover/Monitor

QSC DCM 300 Digital Crossover/Monitor

โพสต์เมื่อ : 26 ส.ค 2567 เวลา 15:23 น.

ยี่ห้อ : QSC

รุ่น : QSC DCM 300

ราคาปกติ : ~~110,000.00~~ บาท

ราคาพิเศษ : 104,500.00บาท

รายละเอียดย่อ : Cinema monitor, crossover, and signal processor with 8 channel analog input, DataPort connections and Intrinsic Correction™ for 3 screen channels, passive, bi-, tri- or quad-amp.

ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944

รายละเอียดทั้งหมด

Features

Analog inputs accept audio from cinema processors or other 8 channel analog audio sources
QSC Intrinsic Correction DSP Settings for optimal performance of QSC cinema speakers
Booth monitor with front panel control for easy operation
Passive, bi-, tri- or quad-amp
Compatible with all existing QSC DCA amplifiers
Bypass mode - routes audio around failed components to ensure that the show will go on
Control and monitoring via Ethernet including full SNMP support
Continued development of software and firmware will add new capabilities via easy updates

Specifications

DCM 300
Dimensions & Accessories
Dimensions (HxWxD)	3.5"(2 RU) x 19" x 15"
Line voltage requirements	100 VAC – 240 VAC, 50/60 Hz
Accessories included	6 ft UL/CSA line cord, Connector Kit
Front Panel Controls and Indicators
Monitor Volume/parameter adjust	Rotary encoder
Setup mode indicator	Yellow LED
LCD	128 x 64 bit Monochrome LCD
Power on indicator	Green LED
Fault detect indicator	Yellow LED
USB Type B port	Config and management interface
Monitor output	3.5 mm TRS
Rear Panel Connectors
Network RJ45	10/100 Mbps network management
RS232	DB-9 Serial Interface
Analog Inputs (1-8)	DB-25
DataPort connectors	HD-15 (DCM100 - 8, DCM300 - 11), QSC amplifier interface
H.I and Monitor output	5 - pin Euro-style (x1) - common GND
Power switch	Rocker switch
Monitor Speaker
Speaker	2"x 3.5" full-range
Amplifier output power	10 watts Class D
Audio Performance
A/D conversion	24-bit delta-sigma, 48 kHz
Frequency response	20 Hz to 20 kHz (+- .5dB)
Inputs/Outputs
Main Analog Input
Connector	DB25F - 8 channel
Input stage type	Active balanced input
Input impedance	20k Ohms
Max analog input level	+14.2 dBu (4.0 Vrms)
THD+N at 2 dB below clip	< .003%
DataPort Outputs (HD15)
Max output level	14 dBu
H.I. and Monitor outputs
Connector	5-pin Euro-style with common GND (LCR sum)
Output stage type	Balanced output
Max output level	18 dBu (adjustable)
Monitor Headphone Output
Connector	Front Panel 3.5mm mini jack
Output stage type	Unbalanced output
Max output level	21 dBu
Network / SNMP
Protocol	Standard TCP/IP implementation over Ethernet or Fast Ethernet. 3rd party interface may use UDP/IP or TCP/IP. Also supports connection to DPM Manager and SNMP
Data rate	10/100 Mbps
Connection requirements	Cat-5 UTP cable or better (100m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN.

QSC DCM 300 Digital Crossover/Monitor

Features

Specifications

เรื่องน่าสนใจอื่น ๆ