Turbosound TCI32-­T-WH ตู้ลำโพงติดผนัง 2 ทาง 3.5" 30 วัตต์ Full Range Loudspeaker with Line Transformer for Installation Applications (White) 120x100 dispersion พร้อมขายึดลำโพงติดผนัง

* สินค้าพร้อมจัดส่ง โปรโมชั่น วันนี้ถึง 30/6/2560

พร้อมขายึดลำโพงติดผนัง

2 Way 3.5" Full Range Loudspeaker with Line Transformer for Installation Applications

Compact 2 way full range surface-mount loudspeaker for installation applications

30 Watts continuous, 120 Watts peak power

High excursion 3.5" low frequency driver with high temperature voice coil

1" ferrofluid cooled neodymium high frequency driver

Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input

Proprietary elliptical waveguide provides wide 120º H x 100º V dispersion

Wall-mount bracket with integral loudspeaker connections included

Architecturally styled glass filled impact resistant enclosure

Semi matt white finish fits unobtrusively in any environment

2 x M6 rigging points compatible with TURBOSOUND and OmniMount* brackets

3/8" mic stand fitting for spot monitor applications

Designed and engineered in England

The TURBOSOUND IMPACT TCI32-T-WH is an ultra-compact passive 120 Watt two way full range surface-mount loudspeaker consisting of a high excursion 3.5" low frequency driver with a high temperature voice coil, matched to a 1" ferrofluid cooled neodymium high frequency driver on a proprietary elliptical waveguide providing wide 120º horizontal by 100º vertical dispersion.

The TCI32-T-WH includes an internal line transformer with multiple taps for use in 70 Volt and 100 Volt line distributed systems, and also provides a 16 Ohm low impedance direct input. The TCI32-T-WH is supplied with an adjustable wall mounting bracket which provides the loudspeaker connections as an integral part of the bracket assembly, allowing the brackets to be sited, installed and wired independently of the loudspeakers being available on-site, making the final installation and commissioning of the loudspeaker system a greatly simplified process.

The architecturally styled glass filled impact resistant enclosure is finished in semi matt white to fit unobtrusively in any environment. M6 threaded fixings are provided on the rear for use with TURBOSOUND wall and ceiling brackets, and OmniMount* brackets, and a 3/8" threaded insert is provided behind an EPDM rubber cover on the bottom of the cabinet for use with microphone stands as a spot monitor.

Dimensions (H x W x D) 450 x 164 x 158 mm (17.7 x 6.5 x 6.2�)

Net Weight 5 kg (11 lbs)

Components 1 x 3.5” (89 mm) LF Driver, 1 x 1” (25 mm) Neodymium Ferrofluid Cooled HF Driver

Frequency Response 74 Hz - 18 kHz ±3 dB, 43 Hz - 20 kHz ±10 dB

Dispersion 120° H x 100° V @ -6 dB points

Sensitivity (1 W @ 1 M) 90 dB

Power Handling 30 Watts Continuous, 120 Watts Peak

Transformer Taps at 30 Watts, 15 Watts, 7.5 Watts (100 V Line); 30Watts, 15 Watts, 7.5 Watts, 3.75 Watts (70 V Line), and Low Impedance Setting

Calculated Max SPL 103 dB Continuous, 109 dB Peak

Nominal Impedance 16 Ohms

Crossover

Internal Passive Crossover at 2.5 kHz, 12 dB / Octave

Construction Gas Injected Glass Filled Moulded ABS Enclosure

Grille Powder Coated Galvanised Perforated Steel

Connectors

Colour Coded Binding Posts

Protection  

Options IP34 Weather Resistance

Standards Fire Retardant UL94 V-0 ABS

Rigging

2 x M6 Fixing Points for TCI-WB Wall Bracket (Supplied). Compatible with TURBOSOUND Wall Brackets and Ceiling Brackets, and OmniMount* Brackets

Spares & Accessories

TS-4W160A16 LF Driver

TS-25T20A8 HF Tweeter

TCI-WB Adjustable Wall Bracket (supplied)