ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944

รายละเอียดทั้งหมด

Turbosound M10 ตู้ลำโพงพร้อมขยายเสียง, Self-powered 2-way 10"+1" loudspeaker 230 watts, 119dB

ลำโพงพร้อมเครื่องขยายเสียง, Self-powered

Separate HF and LF amplifiers

ช่องต่อไมโครโฟนและช่องสัญญาณแบบไลด์ Mic and line inputs

ปุ่มปรับเสียงต่ำและเสียงสูง, Bass and treble EQ controls

ปุ่มปรับแบบมิกเซอร์, Mix Out function

สามารถใช้เป็นตู้มอนิเตอร์บนเวทีได้, Use as a floor monitor

Injection moulded enclosure

มีจุดเสียบเสาตั้งขาตั้งได้ 2 แบบ ตั้งตรงและก้มหน้า, Dual angle pole holder

มีจุดน๊อด M10 สำหรับงานแขวนติดตั้ง, M10 rigging points

 The Milan Mi0 is a compact trapezoidal self-powered two-way loudspeaker enclosure consisting of a 10" reflex-loaded low frequency driver and a 1" high frequency compression driver on a 90°H x 60°V dispersion HF horn in an optimally tuned injection-moulded enclosure, together with an integrated two-channel amplifier module.

The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.

A balanced male XLR output provides a line level mix-out signal to additional powered Milan enclosures. Mains power is supplied via an IEC mains connector with integrated fuseholder. The trapezoidal cabinet is constructed from gas-injected polypropylene, self-coloured in blue/black, with a powder-coated perforated galvanised steel mesh grille, and the symmetrical 43° angled sides enable use as a wedge monitor. A dual-angle pole mount socket is fitted, and a recessed flush handle is provided on the top. Rigging points are provided on the top and bottom to enable vertical or horizontal suspension in permanent installations using M10 eyebolts.

• Net Weight 11.89kg (26.2lbs)
• Dimensions 521.5mm x 329.5mm x 294mm (20.5" x 13" x 11.6")
• Components 1 x 10" (254mm) LF driver, 1 x 1" (25mm) HF compression driver
• Frequency Response 55Hz - 22kHz ±3dB
• Dispersion 90°H x 60°V @ -6dB points
• Maximum SPL 119dB continuous, 125dB peak
• Construction Injection-moulded polypropylene enclosure. Self-coloured in blue/black. Recessed carrying handle. Integral dual angle pole mount socket
• Grille Powder coated perforated galvanised steel mesh
• Connectors Mic input: XLR female, wired pin 2 hot; Line input: Jack/XLR, wired pin 2 hot; Mix out: XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder
• Flying Hardware (6) M10 internal threaded rigging points
• Spares & Accessories LS-1029.2 10" (254mm) LF loudspeaker
• RC-1029 Recone kit
• CD-122 1" (25mm) HF compression driver
• RD-122 Replacement HF diaphragm
• PA-90 Speaker pole 90cm
• PB-55 Wall bracket, pole mount fixing
• EB-10 M10 shoulder eyebolt