Technical Specification

Rated Power Bridge Mode 4Ω 900 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (2 x 2Ω) 450 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Rated Power (2 x 4Ω) 300 Watts per channel @ 1KHz at < 0.05% T.H.D. both channels driven

Rated Power (2 x 8Ω) 200 Watts per channel @ 1KHz at < 0.025% T.H.D. both channels driven

Rated Power (1 x 2Ω) 490 Watts @ 1KHz at < 0.1% T.H.D.

Power Bandwidth 10Hz - 30KHz ; 0, -3dB at rated 150 Watts 8Ω power

T.H.D. (2 x 2Ω) < 0.1% @ 360 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 4Ω) < 0.1% @ 240 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 8Ω) < 0.1% @ 160 Watts per channel from 20Hz - 20KHz

Input CMRR > -65dB @ 1KHz

Rated Power (1 x 4Ω) 330 Watts @ 1KHz at < 0.05% T.H.D.

Rated Power (1 x 8Ω) 220 Watts @ 1KHz at < 0.025% T.H.D.

Minimum Load Impedance 2Ω

Maximum RMS Voltage Swing 42 Volt

Frequency Response 10Hz - 100KHz ; +0, -3dB at 1 Watt

Phase Response +5 to -15 from 20Hz to 20KHz

Input Impedance 10KΩ balanced

Cooling Two temperature dependant variable speed 80 mm. high output DC fans

Controls Two front panel attenuators, rear panel mode switch and gain select switch

Voltage Gain 0.775V, 32dB or 26dB

Crosstalk > -60dB @ 1KHz at rated power @ 8Ω

Hum and Noise > -105dB, "A" weighted referenced to rated power @ 8Ω

Slew Rate > 30V/us

Dampling Factor (8Ω) > 400:1 @ 20Hz - 1KHz

Indicator LEDs 2 clip, 2 signal presence, 1 active status, 2 protection

Protection Thermal, DC, turn-on bursts, subsonic, incorrect loads

Connectors XLR, speakon and binding post speaker output

Construction 16 ga. stell

Dimensions [HxWxD] 89 x 483 x 496 mm.

Net Weight 16 kg.

Gross Weight 19 kg.