ACM-AUDIO Q2150 เพาเวอร์แอมป์ กำลังขับ 2 x 150W @8Ω

Technical Specification

Rated Power Bridge Mode 8Ω 450 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (2 x 4Ω) 225 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Rated Power (2 x 8Ω) 150 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Input CMRR > -65dB @ 1KHz

Power Bandwidth 10Hz - 30KHz ; 0, -0.5dB at rated 80 Watts 8Ω power

T.H.D. (2 x 4Ω) < 0.05% @ 150 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 8Ω) < 0.05% @ 150 Watts per channel from 20Hz - 20KHz

Rated Power (1 x 4Ω) 270 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (1 x 8Ω) 180 Watts @ 1KHz at < 0.1% T.H.D.

Minimum Load Impedance 4Ω

Maximum RMS Voltage Swing 45 Volt

Frequency Response 10Hz - 100KHz ; +0, -3dB at 1 Watt

Phase Response +5 to -15 from 20Hz to 20KHz

Input Impedance 10KΩ balanced

Cooling Two temperature dependant variable speed 40 mm. high output DC fans

Controls Two front panel attenuators, rear panel mode switch and gain select switch

Voltage Gain 0.775V, 32dB or 26dB

Crosstalk > -60dB @ 1KHz at rated power @ 8Ω

Hum and Noise > -106dB, "A" weighted referenced to rated power @ 8Ω

Slew Rate > 22V/us

Dampling Factor (8Ω) > 500:1 @ 20Hz - 1KHz

Indicator LEDs 2 clip, 2 signal presence, 1 bridge, 1 active status/protection

Protection Thermal, DC, turn-on bursts, incorrect loads

Connectors XLR, speakon and binding post speaker output

Construction 16 ga. stell

Dimensions [HxWxD] 44 x 483 x 350 mm.

Net Weight 9 kg.

Gross Weight 10 kg.