ASHLY ne1600
ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944
รายละเอียดทั้งหมด
ASHLY ne1600 เพาเวอร์แอมป์ เครื่องขยายเสียง 450W/Channel @ 8Ω,800W/Channel @ 4Ω,1,600W @ 8Ω Bridged
The ne1600 from Ashly is a rackmount stereo power amplifier with network capability, ideal for installed audio applications. The amplifier has a 10/100 Ethernet jack that allows you to control and monitor the amplifier's functions over a network with the included Proteane software. The rear panel offers XLR and Euroblock analog inputs, Speakon and Euroblock speaker outputs, and XLR and Euroblock analog Aux outputs.
A blank panel on the rear allows you to install an optional CobraNet CNM-2 card for CobraNet capability, or an AES/EBU input to support digital audio. Other useful amplifier functions include DC voltage control, preset recalls, and remote power standby. LED indicators provide you with at-a-glance knowledge of power, standby, network, protection circuitry, audio levels, operating mode, temperature, and current.
Rackmount Design
The rackmount design allows you to install the amplifier in any standard equipment rack for use in a studio or other venues
Multiple Operating Modes
Choose between stereo or bridged operating modes for flexible performance
Network Capability
A 10/100 Ethernet port allows you to monitor and control amplifier functions over a network with the Proteane software
Standard Connectors
XLR and Euroblock inputs and Aux outputs are provided, along with Speakon and Euroblock speaker outputs
Level Controls
Each input has its own stepped and calibrated attenuator knob
Expandable
An input slot on the rear panel allows you to add an optional CobraNet CNM-2 card or an AES/EBU input for added functionality
Voltage Control and Remote Power
The amplifier features DC voltage control and remote power on/off via software
Protection Circuitry
Built-in protection circuitry shields the amplifier against damage from overloads and overheating
Indicators
The amplifier has 4-level signal and clip LEDs, as well as LED indicators that display power, standby, protect, network, temperature, current, and power switch disable status
SPECIFICATIONS
| Power Rating | 450W/Channel @ 8Ω 800W/Channel @ 4Ω 1600W @ 8Ω Bridged |
| Damping Factor | > 250 |
| Input Sensitivity | 26 or 32dB, or 1.4V (Switch-Selectable) |
| Input Impedance | 20 kOhms, Balanced |
| Gain | Variable |
| Frequency Response | 20Hz - 20kHz ±1dB |
| Signal-to-Noise Ratio | > 105dB |
| Total Harmonic Distortion (THD) | < 0.5% |
| Connectors | 2 x XLR Inputs 2 x Euroblock Inputs 2 x XLR Aux Outputs 1 x Euroblock Aux Output 2 x Speakon Outputs 1 x Euroblock Speaker Output 1 x 10/100 Ethernet Port 1 x Remote Euroblock Connector 1 x Input Expansion Slot 1 x AC Power Input |
| Controls | 1 x Power Switch 2 x Level Control Knobs 1 x Mode Selector Switch 1 x High Pass Filter Switch 1 x Sensitivity Selector Switch |
| Indicators | 2 x 4-Segment Level/Clip LED Meters 2 x Temperature LEDs 2 x Current LEDs 1 x Bridge LED 1 x Power LED 1 x Standby LED 1 x Protect LED 1 x Power Switch Disable LED 1 x COM LED |
| Cooling | Variable-Speed Fan, Front-to-Back Airflow |
| Power Consumption | 0.6A, 40W (1/8 Idle) |
| Power Requirements | 100-220VAC |
| Dimensions (HxWxD) | 3.5 x 19 x 15.5" (89 x 483 x 392mm) |
| Weight | 21 lbs (9.5kg) |