lsbthai11632519982731

TANNOY CMS401e

 โพสต์เมื่อ : 25 พ.ย 2567 เวลา 0:50 น.
11

11



รหัส : CMS401e
ยี่ห้อ : TANNOY
รุ่น : CMS401e
ราคาปกติ :  8,200.00 บาท  
ราคาพิเศษ :  7,300.00บาท
รายละเอียดย่อ :
ลำโพงติดเพดาน Ceiling Monitor System 100W

ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944

รายละเอียดทั้งหมด

TANNOY CMS401e ลำโพงติดเพดาน Ceiling Monitor System 100W

The Tannoy CMS401e Ceiling Monitor System is suited to high-level music and speech reinforcement applications requiring exceptional sonic quality with uncompromised reliability.

Specifically designed for fast, simple and cost effective installation in new and existing buildings, the 100mm (4.00") CMS401e can be entirely angled towards the listener within the fixed ceiling mounting ring.

The challenge of difficult speaker placement, in less than perfect room configurations, is therefore eliminated by being able to discreetly pivot the loudspeaker towards the desired area of coverage.

Specifications

 

CMS401e
SYSTEM
Frequency Response (-3dB) (1)110Hz - 22kHz
Frequency Range (-10dB) (1)80Hz - 24kHz
System Sensitivity (1W @1m) (2)88dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle90 degrees conical
Coverage Angle (1kHz to 6kHz)120 degrees
Directivity Factor (Q)5.26 averaged 1kHz to 6kHz
Directivity Index (DI)6.3 averaged 1kHz to 6kHz
Rated Maximum SPLAverage: 105dB 
Peak: 111dB
Power Handling (3)Average: 50W 
Programme: 100W 
Peak: 200W
Recommended Amplifier Power100W @ 6 Ohms
Nominal Impedance6 Ohms
Transformer Taps (via front rotary switch)70V: 30W / 15W / 7.5W / 3.75W / OFF
& Low Impedance operation 
100V: 30W / 15W / 7.5W / OFF
& Low Impedance operation
Crossover7kHz inductively coupled
TRANSDUCERS
Low Frequency100mm (4.00") mineral loaded polypropylene
High Frequency19mm (0.75”) ICT™ aluminium dome.
PHYSICAL
EnclosureBack Can: Reflex loaded UL 94V-0 rated ABS
Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety FeaturesSafety ring located at rear of enclosure
for load bearing safety bond
Back CanComplete with fixed backcan
ConnectorsRemovable locking connector with screw
terminals with "loop through" facility
Hole Cutout Diameter187mm (7.36")
DimensionsBezel diameter: 205mm (8.07")
Front of ceiling to rear of pod: 147.6mm (5.81")
Net Weight (ea)3.05kg (6.72lb)
Included AccessoriesC Ring, tile bridge, paint mask,
cutout template, grille
Optional AccessoriesPlaster (Mud) Ring
Clamping DesignMin / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79")
Recommended clamp torque: 1.5Nm