YAMAHA M7CL-48 48 Mono XLR + 4 Stereo XLR , 56 Channels mixdown with No-Layers, 16 Omni Output, 8 Virtual Rack System, 300 Scene Memory, 16 Mix Bus, 8 Matrix, 8 DCA , LCR Bus, Centralogic interface, Touch-panel Display Control, RJ45, USB Memory Keys Access, HA Remote Controller, M7CL Editor Software, Optional : 3 Card MY-Series, MB-M7CL, PW800W, PSL120 The Time To Go Digital Is Now
If you're planning to build or upgrade a mid-size sound system – installed or portable – now's the time to move up to a top-performance, easy-operation digital system based on the M7CL. This is one digital mixing console that lets you concentrate on sound without being overwhelmed by the technology. - 48 mono microphone/line inputs, 4 stereo inputs, and 3 mini-YGDAIcard slots (a total of 56 or 40 mixing channels).
- 16 mix buses, LCR bus, 8 matrix channels, and 8 DCAs assignable to 16 omnioutputs.
- Virtual effect and EQ rack: up to 4 simultaneous multi-effect processors;up to 8 simultaneous 31-band graphic EQs.
- Centralogic™ interface: central, logical, and intuitive.
- Dual power modes: use the built in power supply, or add an external PW800Wpower supply unit (optional) for failsafe dual-supply operation.
- Compact and lightweight: 48 channels in the space and weight normallyrequired for 24.
| General Specifications | | Sampling Frequency | Internal: 44.1kHz, 48kHz
External: 44.1kHz (-10%) to 48kHz (+6%0) | | Signal Delay | Less than 2.5ms INPUT to Stereo A, B
(Sampling frequency = 48kHz) | | Fader | 100mm motorized x 62 (46) | | Touch Screen LCD | 800 x 600 dot TFT LCD | Total Harmonic Distortion*
Input Gain=Minimum, PAD=ON
Master fader at nominal level &
one input fader at nominal level | INPUT to STEREO A
Less than 0.05% 20Hz to 20kHz @+4dBu into600O | Frequency Response
Input Gain=Max, PAD=Off
Master fader at nominal level &
one input fader at nominal level | INPUT to STEREO A
0.5, -1.5dB 20Hz to 20kHz @+4dBu into 600O | Dynamic Range
Input Gain=Minimum, PAD=ON
Master fader at nominal level &
one input fader at nominal level | 110dB typ. DA Converter (STEREO A)
108dB typ. AD+DA (to STEREO A) | Hum & Noise **
Input Gain=Max, PAD=Off
Master fader at nominal level &
one input fader at nominal level | -128dBu typ. Equivalent Input Noise
-86dBu residual output noise (STEREO A)
STEREO Master off | | Maximum Voltage Gain | 86dB INPUT1-48 to Each Output | | Crosstalk (@1kHz) | -80dB adjacent input channels
(INPUT1-48, ST IN 1-4[L, R], OMNI OUT 1-16) | | Phantom Power | 48V | Dimensions
(W x H x D mm) | M7CL-32: 1,060 x 286 x 701 (Included MBM7CL: 340)
M7CL-48: 1,274 x 286 x 701 (Included MBM7CL: 340) | | Net Weight | M7CL-32: 42kg
M7CL-48: 50kg | | Power Requirements | AC100-240V 50Hz/60Hz | | Power Consumption | M7CL-32: 250W
M7CL-48: 300W | | Operation free-air Temperature Range | +10°C to+35°C | | Storage Temperature Range | -20°C to+60°C | * Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz
** Hum & Noise is measured with 6dB/octave filter @ 12.7kHz; Equivalent to a 20kHz filter with infinite dB/octave |
|
