ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944 Feature GDL-80- Compact digital mixer with scalable, remote I/O
- Systems from 4 to 44 mics
- 1Easy to use, quick to access, analogue style interface
- dSNAKE Cat5 digital snake—up to 120m cable length
- 8.4 inch colour touchscreen for graphical view and setup
- 20 faders, 4 layers, 80 channel strips in a freely customizable layout
- 48 input channels into 30 assignable buses (Aux, Group, Matrix, Main, FX Send) into 20 mix outputs
- 8 stereo RackFX engines* with dedicated ‘short’ returns with 4-band PEQ
- Full processing on all inputs including trim, polarity, HPF, insert, gate, 4-band PEQ, compressor and delay
- Full processing on all outputs including insert, PEQ, GEQ, compressor and delay
- LR, None (monitors), LR+M (sum), LR+M (bus), LCR main mix modes
- 16 DCAs / mute groups
- Built-in Talkback, RTA and Signal Generator
- I/O module options for FOH/Monitor split, multitrack recording, link to iLive and more
- MIDI In/Out and Ethernet Network port
- AviomTM Pro16 compatible Monitor port on main AudioRack
- High end 1dB step recallable mic/line preamps
- User definable channel names and colours
- Engineer’s mono Wedge and stereo IEM strips
- Input, output and insert soft patchbays
- Quick copy, paste and reset of mixes and parameters
- Libraries, Scenes and Show memories with USB transfer
Feature AR-84Input sockets - 8 balanced XLR inputs for microphone and line level sources.
- The preamps are built into the AR84 rack and their Gain, Pad and 48V phantom power is remote controlled from the GLD console via the EXPANDER link.
- The output of the analogue preamps are converted to digital format and transported via a Cat5 cable to be processed and mixed at the GLD-80 mixer.
- The sockets are not numbered.
- This is because the number depends on where the AR84 is plugged into the GLD system.
- Write-on blocks are provided for you to label the sockets.
Output sockets - 4 balanced XLR outputs operating at nominal +4dBu line level.
- Any GLD signal can be patched to any socket using the console I/O screen.
- The default Template Shows provide a logical mapping of these sockets to get you started.
- The sockets are not numbered.
- This is because the number depends on where the AR84 is plugged into the GLD system.
- Write-on blocks are provided for you to label the sockets.
EXPANDER - Port Cat5 cable link to connect the AR84 expander to the EXPANDER port on the AR2412 AudioRack or GLD-80 Mixer.
Kensington security - slot To attach a ‘Kensington lock’ standard anti-theft cable and lock if required.
Fan - A low noise fan inside the rack ensures air movement to keep the circuits and internal components within operating temperature range.
Mains cable - Clip You can secure the cable in place using the plastic P-clip.
- Use a T20 Torx screwdriver to refit the screw.
Mains power input - IEC connector, fuse and power ON/OFF push switch for the built-in universal voltage power supply unit.
- This accepts worldwide voltages from 100 to 240V AC 50/60Hz.
- Check that you have received the correct mains lead for your territory.
|
z-z1615120680808.webp)
z-z1331578030377.webp)