lsbthai11632519982731

8


8
รหัส : ne800
ยี่ห้อ : ASHLY
รุ่น : ne800
ราคาปกติ :  87,200.00 บาท  
ราคาพิเศษ :  47,120.00บาท
เว็บไซต์เกี่ยวข้อง : http://www.ashly.com/products/multi-channel-ne-amplifiers.php
รายละเอียดย่อ : เพาเวอร์แอมป์ เครื่องขยายเสียง 225W/Channel @ 8Ω,400W/Channel @ 4Ω,800W @ 8Ω Bridged

ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944

รายละเอียดทั้งหมด


ASHLY ne800 เพาเวอร์แอมป์ เครื่องขยายเสียง 225W/Channel @ 8Ω,400W/Channel @ 4Ω,800W @ 8Ω Bridged

The ne800 from Ashly is a rackmount stereo power amplifier with network capability, ideal for installed audio applications. The amplifier has a 10/100 Ethernet jack that allows you to control and monitor the amplifier's functions over a network with the included Proteane software. The rear panel offers XLR and Euroblock analog inputs, Speakon and Euroblock speaker outputs, and XLR and Euroblock analog Aux outputs.
A blank panel on the rear allows you to install an optional CobraNet CNM-2 card for CobraNet capability, or an AES/EBU input to support digital audio. Other useful amplifier functions include DC voltage control, preset recalls, and remote power standby. LED indicators provide you with at-a-glance knowledge of power, standby, network, protection circuitry, audio levels, operating mode, temperature, and current.

Rackmount Design

The rackmount design allows you to install the amplifier in any standard equipment rack for use in a studio or other venues

Multiple Operating Modes

Choose between stereo or bridged operating modes for flexible performance

 

SPECIFICATIONS

 

 

Power Rating225W/Channel @ 8Ω 400W/Channel @ 4Ω 800W @ 8Ω Bridged
Damping Factor> 250
Input Sensitivity26 or 32dB, or 1.4V (Switch-Selectable)
Input Impedance20 kOhms, Balanced
GainVariable
Frequency Response20Hz - 20kHz ±1dB
Signal-to-Noise Ratio> 98dB
Total Harmonic Distortion (THD)< 0.5%
Connectors2 x XLR Inputs 2 x Euroblock Inputs 2 x XLR Aux Outputs 1 x Euroblock Aux Output 2 x Speakon Outputs 1 x Euroblock Speaker Output 1 x 10/100 Ethernet Port 1 x Remote Euroblock Connector 1 x Input Expansion Slot 1 x AC Power Input
Controls1 x Power Switch 2 x Level Control Knobs 1 x Mode Selector Switch 1 x High Pass Filter Switch 1 x Sensitivity Selector Switch
Indicators2 x 4-Segment Level/Clip LED Meters 2 x Temperature LEDs 2 x Current LEDs 1 x Bridge LED 1 x Power LED 1 x Standby LED 1 x Protect LED 1 x Power Switch Disable LED 1 x COM LED
CoolingVariable-Speed Fan, Front-to-Back Airflow
Power Consumption0.5A, 35W (1/8 Idle)
Power Requirements100-220VAC
Dimensions (HxWxD)3.5 x 19 x 15.5" (89 x 483 x 392mm)
Weight21 lbs (9.5kg)