RCF P1108-T 8" 400W Outdoor/Indoor Two Way Speaker System

The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required.

In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver loaded on a 1” rotatable constant directivity 90°x60°CD horn with a 8” high efficiency low-frequency transducer with a 1.5” voice coil.

The cabinet is equipped with 4 x M 8 brass inserts and a steel U-Bracket. The front logo is in aluminium and rotatable.

The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.

P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).

Features :

100 W RMS

Weatherproof cabinet IP 55

Aluminium grill and stainless steel bracket

One 8" high-output LF transducer with 1.5" voice coil

One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil

90° x 60° constant directivity horn

2° x 15° enclosure sides for cluster configurations

PTC Driver Protection

LICC (Low Impedance Compensated Crossover) network

2 metres 4 x 1.5 Input cable

Specifications :

ACOUSTICAL SPECIFICATIONS

Frequency Response -10 dB : 80 Hz ÷ 20000 Hz

Max SPL @ 1m : 121 dB

Horizontal coverage angle : 90°

Vertical coverage angle : 60°

Directivity index; Q : 11

System Sensitivity : 95 dB

Nominal Impedance : 16 Ω

Power Handling : 100 W

Peak Power Handling : 400 W

Recommended Amplifier : 200 W

Protections : Dynamic protection on Compression Driver

Crossover frequencies : 2200 Hz

TRANSDUCERS

Compression Driver : 1" throat, 1.5" coil diaphragm assembly

Nominal Impedance : 8 Ω

Input Power Rating : 20 W AES

Sensitivity : 107 dB

Woofer : 8" woofer, 1.5" voice coil

Nominal Impedance : 16 Ω

Input Power Rating : 100 W AES

Sensitivity : 94 dB

INPUT SECTION

Input connector : 4 x 1.5 mm square 2 m Neoprene cable

Constant voltage transformer : 70/100

Power Selectionvv : 70V/30W, 15W - 100V/60W, 30W

CABINET

Cabinet Material : 8 mm Polyethylene rotomoulded

Hardware : 4 x M8 + U-Bracket and Pair of spacers

Grille : Custm perforated aluminium grille with open-cell fiber and water repellent woven fabric backing

Colour : Grey

PHYSICAL SPECIFICATIONS

Height : 266/10.47 mm/inch

Width : 493/19.40 mm/inch

Depth : 250/9.84 mm/inch

Net Weight : 12,5/27.55 kg/lbs