lsbthai11632519982731

26

26



รหัส : CVS6
ยี่ห้อ : TANNOY
รุ่น : CVS6
ราคาปกติ :  6,450.00 บาท  
ราคาพิเศษ :  5,680.00บาท
รายละเอียดย่อ :
TANNOY CVS6 ลำโพงติดเพดาน Coaxial speaker 6" 120 w 8 Ohms Coaxial speaker 6" (150 mm), 120 w 8 Ohms, transformer 70 - 100 v selectable 60/ 30/ 15 w, 79 Hz - 21Khz, 91 dB, White, paintable grille

ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944

รายละเอียดทั้งหมด

TANNOY CVS6  ลำโพงติดเพดาน  Ceiling Monitor 2 Way Speaker, 

Coaxial speaker 6" (150 mm), 120 w 8 Ohms, transformer 70 - 100 v selectable 60/ 30/ 15 w, 79 Hz - 21Khz, 91 dB, White, paintable grille

 

An integral low insertion loss 60W line transformer uses an easily accessible front baffle mounted rotary tapping switch to select between low impedance and 70V or 100V operation:

70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation

100V: 60W / 30W / 15W / OFF & low impedance operation.

Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory.

 

 The CVS6 is supplied with an integral zinc-plated steel back can, with recessed termination box, the removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit.

 

The Tannoy CVS6 is a full bandwidth ceiling speaker system comprising a 160mm (6.00") mid bass driver with a coaxially mounted 19mm (0.75") high frequency section. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability.

The drive unit is mounted in a vented, injection moulded,  paintable front baffle manufactured from UV / weather resistant UL94V-0 ABS material

 

CVS6
PERFORMANCE
Frequency Response (-3dB) (1)79Hz - 21kHz
Frequency Range (-10dB) (1)60Hz - 24kHz
System Sensitivity (1W @1m) (2)91dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle90 degrees conical
Coverage Angle (1kHz to 6kHz)93 degrees conical
Directivity Factor (Q)7.7 averaged 1kHz to 6kHz
Directivity Index (DI)8 averaged 1kHz to 6kHz
Rated Maximum SPLAverage:109dB
Peak: 115dB
Power Handling (3)Average: 60W 
Programme: 120W
Peak: 240W
Recommended Amplifier Power120W @ 6 Ohms
Nominal Impedance6 Ohms
Transformer Taps (via front rotary switch)70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation 
100V: 60W / 30W / 15W / OFF & low impedance operation
Crossover2.5kHz
TRANSDUCERS
Low Frequency150mm (6.00") mineral loaded cone 
High Frequency19mm (0.75") coaxially mounted
PHYSICAL
EnclosureBack Can: Zinc plated steel 
Baffle: Reflex loaded UL 94V-0 rated ABS 
Grille: Steel, with weather resistant coating
Safety FeaturesSafety ring located at rear of enclosure for load bearing safety bond
Clamping DesignSecurity toggle clamp
Cable Entry OptionsCable clamp & squeeze connector for conduit up to 22mm
ConnectorsRemovable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings (pending)UL-1480, UL-2043, CE
Hole Cutout Diameter250mm (9.84")
DimensionsBezel diameter: 279.5mm (11.01”) 
Front of ceiling to rear of back can: 246.5mm (9.70”) 
Front of ceiling to top of safety loop: 258.5mm (10.18”)
Net Weight (ea)4.75kg
Included AccessoriesC Ring
Tile bridge
Paint mask
Cutout template
Grille
Optional AccessoriesPlaster (mud) ring