JBL CBT 70J-1-WH Line Array Column Loudspeaker, Four 5" Drivers, Sixteen 1" Tweeters, Improved Mounting Bracket, White

The JBL CBT 70J-1 is a 2-way line array column loudspeaker (White), ideal for use in auditoriums, lecture halls, stadiums, theme parks and more. The unit features four 5" high-power low frequency drivers and sixteen 1" soft dome tweeters to provide plenty of power and a wide frequency response.

The asymmetrical vertical coverage provides consistent front-to-back sound levels, while the patent-pending Constant Beamwidth Technology provides constant directivity and reduces out-of-coverage lobing. The vertical pattern coverage is switchable between 45deg. and 25deg., allowing you to choose the best use for medium-throw or long-throw applications.

Switchable voicing provides a flat response in music mode and a mid-range presence boost in speech mode to accommodate music and speech programs. Built-in SonicGuard technology provides overload protection for HF devices. This model includes an improved mounting bracket that affords enhanced aiming flexibility and a stronger grille.

Features

• Ideal for use in auditoriums, lecture halls, stadiums, theme parks and more
• Four 5" high-power low frequency drivers and sixteen 1" soft dome tweeters provide plenty of power and a wide frequency response
• Asymmetrical vertical coverage provides consistent front-to-back sound levels by sending more sound towards far areas of a room
• Patent-pending Constant Beamwidth Technology provides constant directivity at all frequencies and reduces out-of-coverage lobing
• The vertical pattern coverage is switchable between 45deg. and 25deg., allowing you to choose the best use for medium-throw or long-throw applications
• Switchable voicing provides a flat response in music mode and a mid-range presence boost in speech mode to accommodate music and speech programs
• Built-in SonicGuard technology provides overload protection for HF devices
• Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt)
• Continuously variable +/-15 degree tilt, as well as 5-degree fixed increment points
• Ten threaded mounting points located on back panel of cabinet conform to industry standard rectangular 5.0 x 2.75" (127 x 70 mm) pattern for OmniMount 60.0 and other compatible third-party brackets
• Threaded mounting points can be utilized for suspension

Specs

• Components Four 130 mm (5 in) LF drivers
• Sixteen 25 mm (1 in) HF drivers
• Frequency Range (-10 dB) 60 Hz - 20 kHz
• Coverage Vertical (selectable via switch)
• Narrow Mode: 25 deg. (2 kHz - 16 kHz) (±10 deg.)
• Broad Mode: 45 deg. (750 Hz - 16 kHz) (±10 deg.)
• Horizontal 150 deg. (500 Hz - 8 kHz, ±20 deg.)
• Sensitivity (2.83V@ 1m) Narrow: (speech mode) 98 dB (1 kHz - 8 kHz)
• (music mode) 93 dB (300 Hz - 18 kHz)
• Broad: (speech mode) 96 dB (1 kHz - 8 kHz)
• (music mode) 92 dB (300 Hz - 18 kHz)
• Nominal Impedance 8 ohms
• Power Capacity 500 W (2000 W peak), 2 hrs
• 350 W (1400 W peak), 100 hrs
• Max SPL Narrow: (speech mode) 125 dB cont ave (131 peak)
• (music mode) 120 dB cont ave (126 peak)
• Broad: (speech mode) 123 dB cont ave (129 peak)
• (music mode) 119 dB cont ave (125 peak)
• Transducer: Low Frequency Drivers 4 pcs, 130 mm (5 in) drivers, dual magnet neodymium, 38 mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV and salt resistance, shielded.
• Transducer: High Frequency Drivers 16 pcs, 25 mm (1 in) drivers, dual magnet neodymium, encased magnet and coated diaphragm for moisture, UV and salt resistance, shielded.
• Enclosure Fiberglass reinforced ABS cabinet, painted aluminum grille
• Outdoor Capability IP-54 rated, per IEC529. UV, moisture and salt-spray resistant
• Insert Points 10 M6 swivel (pan)/tilt (16 mm deep) insert points on back panel
• Dimensions (H x W x D) 27.4 x 6.7 x 9.3" (694 x 170 x 237 mm)
• Weight 21 lb (9.5 kg)