lsbthai11632519982731

QSC WL2082-i-BK ลำโพง Line Array System

 โพสต์เมื่อ : 25 ธ.ค 2567 เวลา 8:34 น.
90

 

90
รหัส : WL2082-i-BK
ยี่ห้อ : QSC
รุ่น : QSC WL2082-i-BK
ราคาปกติ :  122,000.00 บาท  
ราคาพิเศษ :  115,900.00บาท
รายละเอียดย่อ :
Installation line array speaker - dual neodymium 8" cone LF, dual titanium diaphragm, neodymium magnet compression driver HF, selectable bi-amp/tri-amp operation, 140° horizontal coverage, integral array hardware, Color - Black.

ราคาพิเศษสอบถามโทร 02-981-0944,080-614-4774,098-565-9747

รายละเอียดทั้งหมด

Features

  • Installation-optimized design brings affordable and uncompromised line array performance to a broader range of venues
  • Compact and attractive appearance, available in black and white, harmonizes with any installation environment
  • Wide 140° horizontal coverage
  • Economical and easy-to-install suspension system with ample array adjustability 

 

สเปค

 

Configuration2½ way, biamp or triamp
Transducers
High Frequency


Low Frequency
Dual 50 W 8Ω 1-inch exit, 1.75-inch titanium diaphragm, neodymium magnet assembly
Dual 200 W 16Ω 8-inch woofers, 2-inch voice coils, neodymium magnet assemblies, weather resistant cone
Frequency Response (±3 dB)80 Hz - 20 kHz
Frequency Range (-10 dB)68 Hz - 22 kHz
Nominal ImpedanceHF: 16Ω
LF biamp mode: 8Ω
LF triamp mode: 16Ω (×2)
SensitivityHF: 106 dB
LF: 97 dB
(4 V @ 1 m)
Continuous Power Capacity 1

 		HF: 100 W
LF biamp mode: 400 W
LF triamp mode: 200 W (×2)
Recommended PowerHF: 200 W
LF biamp mode: 800 W
LF triamp mode: 400 W (×2)
Maximum Output (dB SPL at 1 m)
Continuous / Peak
HF: 126 dB / 132 dB
LF: 122 dB / 128 dB
Nominal CoverageHorizontal 140 degrees
Vertical: dependent on number of elements used
Cabinet TypePorted, elliptical / trapezoidal
Enclosure MaterialHIPS (high impact polystyrene) with UV protectant
FinishAvailable in black (WL2082-i BLK) or white (WL2082-i WHT) paintable
GrillePerforated, formed aluminum
Connectors2 x NL-8 in parallel
Pin Outs 
PinsBi-ampTri-amp
1+/1-NCNC
2+/2-NCLF2
3+/3-LFLF1
4+/4-HFHF

 
Attachment PointsIntegral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10°
Dimensions (HWD) inches11.8 x 27 x 13.4
Dimensions (HWD) mm300 x 686 x 340
Weight37 lb / 16.8 kg net
45 lb / 20.45 kg shipping
Accessories AvailableFB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white.

EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white.

PB2082-i: Pullback bar for WL2082-i. Pulls the bottom of the array back to achieve the desired angle. Available in black or white.

AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually.

QRP-KIT-1: Kit of four quick-release pins for use in lieu of included bolts.