lsbthai11632519982731

QSC I/O FRAME Kit Versatile

 โพสต์เมื่อ : 26 ส.ค 2567 เวลา 15:23 น.
KitVersatile

     
KitVersatile


ยี่ห้อ : QSC

รุ่น : QSC I/O FRAME Kit

ราคาปกติ : 148,000.00 บาท

   

ราคาพิเศษ : 140,600.00บาท

 

รายละเอียดย่อ : I/O Frame with four card slots, 16x16 network I/O channels, dual LAN ports for network redundancy, and 8 configurable GPIO, 1RU. Rear plates (RP1 Kit) are included.

ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944

รายละเอียดทั้งหมด

Features

Available cards include:

 

Microphone/Line level input card:
  • 4 channels
  • Greater than 112 dB dynamic range
  • Less than 0.004% THD+N
  • Phantom power (configured via software)
 
Line level output card:
  • 4 channels
  • Greater than 112 dB dynamic range
  • Less than 0.004% THD+N
 
QSC DataPort I/O and instrumentation card:
  • 4 channels
  • Greater than 114 dB dynamic range
  • Less than 0.004% THD+N
  • Supports dataport amplifiers (CX, PowerLight, PL2, PL3, DCA)
 
AES/EBU input/output card:
  • 4 x 4 Digital audio channels
  • Frequency Response +/- 0.2 dB
  • 4 connectors
 

 

SPECIFICATIONSCIML4CIML4-HPCOL4CODP4
DescriptionMic/Line Input
Four channels of microphone / line-level analog audio input with 48V phantom power		High-Performance Mic/Line Input 
Four channels of microphone / line-level analog audio input with 48V phantom power and high performance pre-amplifiers and A/D converters		Line Output 
Four channels of balanced, line-level analog output		DataPort Output 
Four audio output channels (two DataPort connectors) for connection to DataPort-equipped QSC amplifiers
Performance    
  Dynamic Range Unweighted
  Dynamic Range A-weighted		> 105 dB
> 108 dB		> 112 dB
> 115 dB		> 112 dB
> 115 dB		> 114 dB
> 117 dB
  Distortion 20 Hz–20 kHz
    +4 dBu (nominal input)
  Distortion 20 Hz–20 kHz 
     2 dB below clip (max)		< 0.009% THD+N

< 0.08% THD+N		< 0.004% THD+N

< 0.06% THD+N		-

< 0.004% THD+N		-

< 0.004% THD+N
  Crosstalk 20 Hz - 20 kHz
  Inter-channel (max)
  Inter-channel (typ)
  Intra-channel (max)
  Intra-channel (typ)
> 100 dB
> 110 dB
> 100 dB
> 110 dB
> 110 dB
> 110 dB
> 110 dB
> 110 dB
> 100 dB
> 110 dB
> 100 dB
> 110 dB
> 95 dB
> 100 dB
> 100 dB
> 110 dB
  Frequency Response 
  20 Hz–20 kHz (max)
  20 Hz–20 kHz (typ)
± 0.5 dB
± 0.2 dB
± 0.5 dB
± 0.2 dB
± 0.5 dB
± 0.2 dB
± 0.5 dB
± 0.2 dB
  Input Impedance
  Balanced (nominal)
  Unbalanced (nominal)
10 kΩ
10 kΩ
10 kΩ
10 kΩ		  
  Common Mode Rejection
  20 Hz–20 kHz (max)
  20 Hz–20 kHz (typ)
> 45 dB
> 50 dB
> 45 dB
> 50 dB		  
  Max Input Level 
 VrmsdBudBv
10.123-16-18.2
22.25107.04
38.702118.8
417.352724.78

(4 selections)		1.23 to 17.35 V rms56 to 27 dBu58.2 to 24.8 dBv
(continuously variable)		--
  MuteInfinite attenuation (via digital mute)Infinite attenuation (via electro-mechanical relays)
Audio Conversion
  Analog to Digital Conversion  (ADCs)24-bit delta-sigma at 48 or 96 kHz sample rate24-bit delta-sigma at 48 or 96 kHz sample rate--
  Digital to Analog Conversion   (DACs)--24-bit delta-sigma at 48 or 96 kHz sample rate
  Group Delay< 13 samples (≈ 271 μs) at 48 kHz< 10 samples (≈ 196 μs)
at 48 kHz		< 13 samples (≈ 271 μs)
at 48 kHz
ConnectorsFour 3-terminal Euro-style detachable terminal blocks
 		Two 15-pin HD15 connectors
User-configurable options (software enabled)
Phantom Power+48 V phantom power (meets IEC 1938 [1996] spec)+48 V phantom power (meets IEC 1938 [1996] spec)--
Output Trim
    V rms (max)
    dBu (max)
    dBv (max)		  
8.7 V
21 dBu
18.8 dBv		 
Amplifier Standby--Set or clear amplifier in standby mode-
Mute--Set or clear individual
channel mutes		-
Enable Meters--Enable data collection of meters for each channel-
Audio Output Levels--Adjust individual audio channel levels-
Amplifier Model Support--CX, PowerLight™ 3 Series, DCA, and legacy V1 models